Order Products : sales@su-jiao.com

Pinnacle PP 1704

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	49csfW_Pinnacle-PP-1704.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
4 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONS Pinnacle Polymers Polypropylene 1704 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics. The 1704 product provides: Excellent color and processing stability Resistance to gas fading Low water carry-over Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Message

4 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONS

Pinnacle Polymers Polypropylene 1704 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics.

The 1704 product provides:

Excellent color and processing stability

Resistance to gas fading

Low water carry-over

Excellent cleanliness

Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Features	Clean/High Purity Food Contact Acceptable Gas-fading Resistant Good Color Stability Good Processing Stability Homopolymer Low Water Carryover
Uses	Carpet Backing Industrial Applications Tape Textile Applications
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	35.9	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	10	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1660	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	37	J/m	ASTM D256

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I

Resin Grade	Manufacturer	Category	Trademark
SANREX CLM-AM25	Techno Polymer Co, Ltd.	SAN	SANREX
TEKNIFLEX® ECO P7P	Tekni-Films, a div of Tekni-Plex	Film, PP/COC/EVOH/PP	TEKNIFLEX® ECO
Zytel® FE3734 NC010	DuPont Performance Polymers	Nylon 612	Zytel®
陶氏低密度聚乙烯 208C	The Dow Chemical Company	LDPE	DOW™ LDPE
APEX® 3311-65NT	Teknor Apex Company	PVC, Flexible	APEX®