Order Products : sales@su-jiao.com
Tislamid® PA66 PA66 50 GFR MoS
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Tisan |
| Trademark: | Tislamid® PA66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 49A5a2_Tislamid-PA66-PA66-50-GFR-MoS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tislamid® PA66 PA66 50 GFR MoS is a Polyamide 66 (Nylon 66) material filled with 50% glass fiber. It is available in Africa & Middle East or Europe for injection molding. Primary attribute of Tislamid® PA66 PA66 50 GFR MoS: Lubricated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.51 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.010 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 2.0 | % | ISO 62 |
| Ash Content | 50 | % | ISO 3451 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 85 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield | 151 | MPa | |
| Break | 151 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 0.30 | % | |
| Break | 0.30 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 11 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 255 to 260 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 120 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 260 to 280 | °C | |
| Middle Temperature | 260 to 280 | °C | |
| Front Temperature | 260 to 280 | °C | |
| Nozzle Temperature | 250 to 270 | °C | |
| Processing (Melt) Temp | 260 to 290 | °C | |
| Mold Temperature | 75.0 to 85.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN601G40-F | RJM International, Inc. | Nylon 66 | RJM |
| Ultramid® B3Z BK30464 | BASF Corporation | Nylon 6 | Ultramid® |
| NaturePlast PLE 001 | NaturePlast | PLA | NaturePlast |
| Cevian®-V 720 | PlastxWorld Inc. | ABS | Cevian®-V |
| ESTADIENE 1218 V0/B | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
