Order Products : sales@su-jiao.com
Moldex® QS986A/M151
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Mitsubishi Chemical Corporation |
| Trademark: | Moldex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 48lwMe_Moldex-QS986A-M151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moldex® QS986A/M151 is a Polyolefin material. It is available in Asia Pacific. Primary attribute of Moldex® QS986A/M151: Crosslinkable. Typical application of Moldex® QS986A/M151: Hose/Tubing |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ISO 1183 |
| Gel Content 1(120°C) | 91 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 77 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 3.40 | MPa | |
| Yield, 80°C | 1.30 | MPa | |
| Break, 23°C | 20.5 | MPa | |
| Break, 80°C | 4.00 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Break, 23°C | 580 | % | |
| Break, 80°C | 630 | % |
| Note Message | |
|---|---|
| 1 . | In Xylene, 20 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sofprene T® 550100A40 | SO.F.TER. SPA | SBS | Sofprene T® |
| Di-Pak™ E-4901-30 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| INEOS PP L24G-00 | INEOS Olefins & Polymers USA | PP Impact Copolymer | INEOS PP |
| INSULCAST® 502/INSULCURE 11B | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| LUVOCOM® 55-8647 | LEHVOSS Group | PC+ABS | LUVOCOM® |
