Order Products : sales@su-jiao.com
Vikalloy P51
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | Viking Polymers, LLC |
| Trademark: | Vikalloy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 46XPSQ_Vikalloy-P51.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vikalloy P51 is an acrylic acid (PMMA) PVC (PMMA PVC) material,. This product is available in North America, Europe or Asia Pacific region. The processing method is: profile extrusion molding. The main characteristics of Vikalloy P51 are: chemical resistance. the typical application field of Vikalloy P51 is: architectural application |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 53.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 70 | % | ASTM D638 |
| Flexural Modulus | 2550 | MPa | ASTM D790 |
| Flexural Strength | 72.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 160 | J/m | ASTM D256 |
| Reverse Notch Izod Impact (23°C) | 1000 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 71.1 | °C | ASTM D648 |
| Additional Information |
|---|
| Specific Gravity, ASTM D792, 1.35 - 1.45Notched Izod Impact Resistance, ASTM D256, 73°F: 2 - 4 ft*lb/inReverse Notched Izod Impact Resistance, ASTM D256, 73°F: 18 - 20 ft*lb/in |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 - 182 | °C | |
| Cylinder Zone 2 Temp. | 160 - 182 | °C | |
| Cylinder Zone 3 Temp. | 160 - 182 | °C | |
| Cylinder Zone 4 Temp. | 160 - 182 | °C | |
| Cylinder Zone 5 Temp. | 160 - 182 | °C | |
| Adapter Temperature | 171 - 177 | °C | |
| Die Temperature | 171 - 177 | °C |
| Extrusion instructions |
|---|
| Screw RPM's of 23 - 33 are typical. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1001 TFE 15 Z | RTP Company | PBT | RTP |
| Teflon® PTFE 7C X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| CERTENE™ LDF-0522P | Muehlstein | LDPE | CERTENE™ |
| Celstran® PA66-GF50-02-Natural | Celanese Corporation | Nylon 66 | Celstran® |
| Honghai CPE 140B | Weifang Honghai Plastics Technology Co., Ltd. | CPE | Honghai |
