Order Products : sales@su-jiao.com
Prime ABS Weather-X 100
| Category: | ABS+Acrylic , Acrylonitrile Butadiene Styrene + Acrylic (PMMA) |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime ABS Weather-X |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 44wYFW_Prime-ABS-Weather-X-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prime ABS Weather-X 100 is an ABS substrate with an Acrylic co-extruded cap. If requested a thin layer of Acrylic can be extruded on the back side for rigidizing. It offers good weatherability, chemical resistance, and high gloss with good DOI. Applications: This product is ideal for outdoor applications such as marine, ATV, RV, Tub & Shower Surrounds or anything where the above characteristics are required. Processing: Forming conditions for this product are: Surface Temperature =300-390° F Mold Temperature = 110-185° F Plug Temperature = 220-300° F De-mold = 200° F Mold Shrink = .005 - .008 in/in Primary side of sheet should not be heated as much as the secondary side. Finishing: Parts from this product may be joined with machine screws, bolts, nuts, and washers, rivets and spring steel fasteners. Thread cutting or thread-forming screws are an economical means of securing separate parts. Press and snap techniques, sonic welding and chemical bonding may also be used. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: There are many colors available, however, please check with your Primex representative for specific colors. Typically this product is smooth, however, there are several patterns available, such as haircell, calfgrain & levant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 6.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 41.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 29 | % | ASTM D638 |
| Flexural Modulus | 2000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (22°C, 3.18 mm) | 300 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 94.4 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 85.0 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| De-mold Temperature | 93 | °C | |
| Mold Temperature (other) | 43 to 85 | °C | |
| Plug Temperature | 104 to 149 | °C | |
| Surface Temperature | 149 to 199 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® OBC 4764A | Teknor Apex Company | TPE | Telcar® |
| 4PET® 9L22120 HIUV | 4Plas | PET | 4PET® |
| Grilamid® L 16 GM nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| ISPLEN® PM 250 BX | REPSOL | PP Homopolymer | ISPLEN® |
| LUBEMID B27 FR V0 NATURAL | LUBEN PLAST srl | Nylon 6 | LUBEMID |
