Order Products : sales@su-jiao.com
Sumikon® EM-TX235
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3zcRg4_SumikonEMTX235.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON® EM-TX235 type black is a heat dissipative thermoset molding compounds, Non-electrical insulative(5.5W/mk) based on epoxy (TS) polymer. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.70 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.30 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 14000 | MPa | JIS K6911 |
| Flexural Strength | 65.0 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.0 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity | 3.6 | W/m/K | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® ET3117 | Covestro - Polycarbonates | PC | Makrolon® |
| Vyncolit® BXE7665 | Vyncolit N.V. | Phenolic | Vyncolit® |
| Kepamid® 1315GF | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| Paxon™ BU46-060 | ExxonMobil Chemical | HDPE, UHMW | Paxon™ |
| Badatech HT® PEEK CF10/GR10/TF10 | Bada AG | PEEK | Badatech HT® |
