Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 814-01
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3zTnzg_ASI-POLYETHYLENE-CP-814-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 814-01 Natural is a linear low-density polyethylene resin with excellent molding characteristics and good low temperature impact. This product meets the specifications contained in FDA Regulation CFR 177.1520, (c) 2.1. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.924 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 50.0 | hr | ASTM D1693C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 180 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 317 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (40°C) | 27.1 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -71.0 | °C | ASTM D746 |
| Melting Temperature | 122 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 2925-75 Clear 8403 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| WELLAMID Nylon 6600 MRGV 20/20 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| APEX® 3310-50NT | Teknor Apex Company | PVC, Flexible | APEX® |
| PETILEN I22-19T | PETKIM Petrokimya Holding A.S. | LDPE | PETILEN |
| PENTAMID A GV35 H black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
