Order Products : sales@su-jiao.com
Maxelast® F02-141J
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantong Polymax Elastomer Technology, Co., Ltd |
| Trademark: | Maxelast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3zMYd9_Maxelast-F02-141J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Maxelast® F02-141J is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Maxelast® F02-141J are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 65 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 1.78 | MPa | |
| 300% Strain | 2.34 | MPa | |
| Tensile Strength (Yield) | 3.10 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 710 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TA210ST | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| THERMOLAST® K TF8THT (Series: FC/ht) | KRAIBURG TPE | TPE | THERMOLAST® K |
| NuSil FS-3730-11 | NuSil Technology | Silicone | NuSil |
| Badamid® LA70 L | Bada AG | Nylon 66 | Badamid® |
| INEOS HDPE A60-70-162 | INEOS Olefins & Polymers USA | HDPE | INEOS HDPE |
