Order Products : sales@su-jiao.com
MAJORIS MN300U BLACK 8229
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3vFCdy_MAJORIS-MN300U-BLACK-8229.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MN 300U BLACK 8229 is a black, 30% mineral filled high density polyethylene compound intended for injection molding. The product is available in natural (MN300U) and black (MN300U-8229) but other colors can be supplied on request. MN300U BLACK 8229 has been developed for applications where high density, good surface finish and good flow properties are necessary. Applications High density products, such as:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield, injection molding | 12.8 | MPa | ISO 527-2/50 |
| Fracture, injection molding | 21.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1(Injection Molded) | 1400 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 78.0 | °C | ISO 75-2/B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 210 - 250 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Hold-on-pressure: 50 to 60% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1403 P | RTP Company | PPSU | RTP |
| DOMAMID® 6 PZ 40B2 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Fluon® PTFE RB2510 | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| Karina CLEAR PVC COMPOUND 55/209 | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Plaskon CMU-880-MA | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
