Order Products : sales@su-jiao.com
Dynaprene® VE1064A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | Dynaprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3t2LlI_Dynaprene-VE1064A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynaprene® VE1064A is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific for injection molding. Primary attribute of Dynaprene® VE1064A: Good Processability. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Moisture Content | < 0.060 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 67 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.68 | MPa | ASTM D412 |
| Tensile Strength - Across Flow (Yield) | 5.99 | MPa | ASTM D412 |
| Tensile Elongation - Across Flow (Break) | 390 | % | ASTM D412 |
| Tear Strength 1(23°C) | 37.0 | kN/m | ASTM D624 |
| Compression Set (100°C, 22 hr) | 28 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Volume (121°C, 24 hr, in IRM 903 Oil) | 66 | % | ASTM D471 |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 380.5 FR | RTP Company | PC | RTP |
| Stylac™ IC10N | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| ULTEM™ 2410 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| CERTENE™ SGM-085 | Muehlstein | PS (GPPS) | CERTENE™ |
| HiFill® PA4/6 GF50 HS BK | Techmer Engineered Solutions | Nylon 46 | HiFill® |
