Order Products : sales@su-jiao.com

LightSpan® LS1-6941

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	LightSpan®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3sytv1_LightSpan-LS1-6941.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
From LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available. The benefits of silicone include the following: Thermal Stability Low Ionic Species Maintain Optical Clarity (90% minimum @ 400nm) Low Moisture Absorption (<0.4%) Optimization for UV Resistance Adjustable Cure Low Outgassing Low Shrinkage, <1% Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion Gernal Purpose: Optical Adhesives and Elastomers Comments: Tough, Tensile 750 psi, Tear 80 ppi

Message

From LEDs to fiber optics, NuSil Technology's LightSpan™ brand product line delivers the most comprehensive line of refractive index matching adhesives, encapsulants and thermosets available.

The benefits of silicone include the following:

Thermal Stability

Low Ionic Species

Maintain Optical Clarity (90% minimum @ 400nm)

Low Moisture Absorption (<0.4%)

Optimization for UV Resistance

Adjustable Cure

Low Outgassing

Low Shrinkage, <1%

Low Modulus: Stress reduction for bonding materials with different coefficients of thermal expansion

Gernal Purpose: Optical Adhesives and Elastomers

Comments: Tough, Tensile 750 psi, Tear 80 ppi

General Information
Features	Good Thermal Stability Good Toughness Good UV Resistance Low Moisture Absorption Low Shrinkage Low to No Outgassing
Uses	Adhesives Lenses
Processing Method	Compression Molding Injection Molding

Optical	Nominal Value
Refractive Index	1.410

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Uncured Properties	Nominal Value	Unit
Viscosity
-- ¹	50	Pa·s
-- ²	75	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	> 1400	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	5.17	MPa
Tensile Elongation at Break	310	%

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
SOLPLAST TV 10000B	UTEKSOL d.o.o.	SEEPS	SOLPLAST TV
Sylvin 8200-85 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
NEXT PCR PA66 GM35-300PCR	NEXT Specialty Resins, Inc.	Nylon 66	NEXT PCR
Edgetek™ AT-25GF/000 NC001	PolyOne Corporation	Acetal (POM) Copolymer	Edgetek™
Sylvin 9077-75 Yellow 4181	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin