Order Products : sales@su-jiao.com
Ecomass® 1002ZB92
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Ecomass Technologies |
| Trademark: | Ecomass® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3sd3L1_Ecomass-1002ZB92.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 6.90 | g/cm³ |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 9.00 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 500 | % | ISO 527-2 |
| Flexural Modulus | 200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ISO 180/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 65.6 | °C | |
| Drying Time - Desiccant Dryer | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.103 - 0.172 | MPa | |
| Screw Speed | 100 - 250 | rpm | |
| Clamp Tonnage | 3.4 - 5.5 | kN/cm² | |
| Cushion | 6.35 - 12.7 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Injection instructions |
|---|
| Pack (Hold) Pressure: 65 to 75% of Injection PressureFill Time: 1.0 to 2.0 in/secPack (Hold) Time: 10 to 15 secCooling Time: As requiredFeed Throat: CooledNozzle Type: Reverse TaperCheck Type: Free FlowMaximum Drying Temp: 180 °FDryer Dew Point: -20 to -40 °FMinimum Air Flow: 0.8 to 1.0 CFMInjection Pressure: As Required |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Melt Temperature | 200 - 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 HI6 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| VECTOR® 7400 | Dexco Polymers LP | SBS | VECTOR® |
| Edgetek™ NI-10GF/000 | PolyOne Corporation | Nylon 610 | Edgetek™ |
| PLASTRON™ PP-CF40-11 | Daicel Polymer Ltd. | PP, Unspecified | PLASTRON™ |
| TECACOMP® PEEK 150 GF30 natural 9592 | Ensinger GmbH | PEEK | TECACOMP® |
