Order Products : sales@su-jiao.com
Andur 9000-AP/Curene® 280
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3pQfZ5_Andur-9000-AP-Curene-280.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| All properties based on Andur® 9000-AP cured with Curene® 280 |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 12.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.96 | MPa | ASTM D412 |
| 300% strain | 7.93 | MPa | ASTM D412 |
| Tear Strength | |||
| -- 1 | 39.4 | kN/m | ASTM D624 |
| Cracking | 7.0 | kN/m | ASTM D470 |
| Compression Set | 26 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 15 | min | |
| Post Cure Time (23°C) | 72 | hr |
| Additional Information |
|---|
| Prepolymer NCO%: 4.9-4.5Grams Curene® 280 per 100 grams prepolymer: 32.6Rebound, %: 28Stoichiometry: 0.95Prepolymer Temperature, °F: 190-210Curene® 280 Temperature, °F: 158Post Cure Time, 212°F, hours: 16 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 107 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Propionate 360A4000012 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| UNIPA® M | Nytef Plastics, Ltd. | Nylon 6 | UNIPA® |
| Bergamid™ A700 TM-YF | PolyOne Corporation | Nylon 66 | Bergamid™ |
| HiFill® PC/PBT IM 6370 GF30 | Techmer Engineered Solutions | PC+PBT | HiFill® |
| LEXAN™ 943 resin | SABIC Innovative Plastics | PC | LEXAN™ |
