Order Products : sales@su-jiao.com

SOLPLAST TC 2000F

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	UTEKSOL d.o.o.
Trademark:	SOLPLAST TC
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3oXhmy_SOLPLAST-TC-2000F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles. Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm. For coloring masters are used on a polyolefine base (PE, EVA). SERIES 2000 Standard compounds: Shiny or neutral appearance Expanded or compact surface Suitable for less demanding thinner soles without sharp bended parts 2000 F Hard parts of the sole

Message

Is a commercial name for thermoplastic elastomers (TPE - S) based on SBS (styrene - butadiene - styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles.

Resistance to acid, bases and all aqueous solutions is excellent.

Resistance to alcohol and glycols is medium good.

Resistance to aromatic hydrocarbons, fat and of oil is bad.

All "SOLPLASTS" have a good electric-volume resistance: thats more then 1e12 ohm-cm.

For coloring masters are used on a polyolefine base (PE, EVA).

SERIES 2000
Standard compounds:

Shiny or neutral appearance

Expanded or compact surface

Suitable for less demanding thinner soles without sharp bended parts

2000 F

Hard parts of the sole

General Information
Features	Acid Resistant Base Resistant
Uses	Footwear
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.960 to 1.00	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	80 to 95		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	8.00 to 10.0	MPa	ISO 527-2
Tensile Strain (Break)	390 to 410	%	ISO 527-2
Abrasion	100 to 140	mm³

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SFE3500	Teknor Apex Asia Pacific PTE. LTD.	PVC, Flexible	Sinvicomp
Texalan® 5 Series 595A	Austin Novel Materials Co. Ltd.	TPU-Polyester	Texalan® 5 Series
Ad-Tech Epoxy EL-325-1-HTTC	Ad-Tech Plastic Systems Corp.	Epoxy	Ad-Tech Epoxy
ESTABLEND 8500	Cossa Polimeri S.r.l.	PC+ABS	ESTABLEND
LNP™ THERMOCOMP™ 2X00858 compound	SABIC Innovative Plastics	FEP	LNP™ THERMOCOMP™