Order Products : sales@su-jiao.com
RELENE® HD53EA010
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3nPKOM_RELENE-HD53EA010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD53EA010 is a High Density Polyethylene (HDPE) grade produced and specially formulated to manufacture stretched tape products and other extrusion products with good combination of tenacity and elongation. It has very good processability and stretchability, less motor load and high output combined with good tape properites to make it a grade of choice. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 15 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 820 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® IN-15069 | Teknor Apex Company | TPE | Monprene® |
| CALIBRE™ 1602 LTD | Trinseo | PC | CALIBRE™ |
| Durethan® DP AKV 50 HR H2.0 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| LUVOCOM® 1/CF/20/TF/15/SI/2 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Sylvin 9077-80 Grey 9534 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
