Order Products : sales@su-jiao.com
Andur 95 AP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3mmaSn_Andur-95-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 95-AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 95 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, and by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 95 | ASTM D2240 | |
| Shaw D | 47 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 15.0 | MPa | ASTM D412 |
| 300% strain | 29.8 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 52.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 370 | % | ASTM D412 |
| Compression Set | 28 | % | ASTM D395B |
| Bayshore Resilience | 45 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.0 - 5.0 | min | |
| Demold Time (100°C) | 20 - 25 | min | |
| Post Cure Time (100°C) | 3.0 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 93 to 97Durometer Hardness, ASTM D2240, Shore D: 46 to 48Die C Tear, ASTM D1004: 600 pliAverage Split Tear, ASTM D1938: 150 pliStoichiometry Curative Level: 95%Cure Time, 150 to 160°F: OvernightMix Temperature: Andur 95 AP: 180-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-1996E NAT | Teknor Apex Company | TPE | Telcar® |
| LNP™ LUBRICOMP™ KP003AXZ compound | SABIC Innovative Plastics | Acetal (POM) Homopolymer | LNP™ LUBRICOMP™ |
| Lucent POM POM-900P | Lucent Polymers, Inc. | Acetal (POM) Homopolymer | Lucent POM |
| Polifil® PP T-2018 FDA | The Plastics Group | PP, Unspecified | Polifil® PP |
| Durethan® BKV 130 CS DUS008 600091 | LANXESS GmbH | Nylon 6 | Durethan® |
