Order Products : sales@su-jiao.com
GATONE™ 5400
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Solvay Specialities India Private Limited (SSIPL) |
| Trademark: | GATONE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3l3VzC_GATONE-5400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GATONE™ 5400 is a Polyetheretherketone (PEEK) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of GATONE™ 5400: Flame Rated. Typical applications include:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Volume-Flow Rate (MVR) (380°C/5.0 kg) | 10.0 to 15.0 | cm³/10min | ASTM D1238 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, Injection Molded) | 3800 | MPa | ASTM D638 |
| Tensile Strength (23°C, Injection Molded) | 95.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 50 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 3800 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 160 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 60 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 150 | °C | ASTM D648 |
| Continuous Use Temperature | 260 | °C | ASTM D794 |
| Glass Transition Temperature | 148 | °C | DSC |
| CLTE - Flow | 9.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C, 60 Hz) | 2.90 | ASTM D150 | |
| Dissipation Factor (23°C, 60 Hz) | 3.0E-3 | ASTM D150 | |
| Arc Resistance | 35.0 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 150 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PureTherm® 3007C Medical | Tekni-Films, a div of Tekni-Plex | Film, PVC | PureTherm® |
| AEI SX490:CM401 and SX490:CM401-2 | AEI Compounds Limited | LDPE | AEI |
| AKROMID® B3 GF 30 S1 black 950089 (2091) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Colorite 11 Series 9511 | Colorite Polymers | PVC, Unspecified | Colorite 11 Series |
| Innova Clear R 350L G2 | Innova SA | PS (HIPS) | Innova |
