Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FE 5622Q

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3kgUp3_3MDyneonFluoroelastomerFE5622Q.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroelastomer FE 5622Q is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5622Q has an incorporated bisphenol cure system.

Special Features

Composition: dipolymer of vinylidene fluoride and hexafluoropropylene

Improved scorch resistance at high moulding temperatures

Excellent mould release

Process targets: injection, transfer and compression moulding, bonding and calendering

Proprietary incorporated cure technology

Clean running

Typical Applications
The development of 3M™ Dyneon™ Fluoroelastomer FE 5622Q targeted bonded shaft seal applications.

General Information
Features	Good demoulding performance
Uses	Seals Bonding
Appearance	Opacity White-like
Forms	Thick sheet
Processing Method	Resin transfer molding Compression molding Calendering Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.80	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	22	MU	Internal method
Fluorine Content	66	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	71		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% Strain)	3.60	MPa	ASTM D412A
Tensile Strength ²	16.2	MPa	ASTM D412A
Tensile Elongation ³(Break)	300	%	ASTM D412A
Compression Set			ASTM D1414
200°C, 70 hr ⁴	23	%	ASTM D1414
200°C, 70 hr ⁵	22	%	ASTM D1414

Note Message
1 .	D mould
2 .	Die D
3 .	D mould
4 .	Post cured 16 hours @ 230°C
5 .	Post cured 24 hours @ 260°C

Resin Grade	Manufacturer	Category	Trademark
Prime Flexible 7072 NAT	Prime PVC®	PVC, Flexible	Prime Flexible
Electrafil® 99054	Techmer Engineered Solutions	PP Copolymer	Electrafil®
Haysite BMC 270FRII	Haysite Reinforced Plastics	Polyester, TS	Haysite BMC
IDI SMC S31 (Glass Content 26%)	IDI Composites International	TS, Unspecified	IDI SMC
POCAN® S 7020 000000	LANXESS GmbH	PBT	POCAN®