Order Products : sales@su-jiao.com
Estane® 58810 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3kKP6p_Estane-58810-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58810 TPU is a 90A Polyether-Type thermoplastic polyurethane Description: High melt flow and improved temperature resistance Uses: Extrusion - Wire and cable, Hose and tube |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 87 - 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 37.7 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 41.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 9.00 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 17.2 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 38.3 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 530 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 59.8 | kN/m | ASTM D624 |
| Cracking | 18 | kN/m | ASTM D470 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 25 | % | ASTM D395 |
| 70°C, 22 hr | 60 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -44.0 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 176 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 191 | °C | |
| Cylinder Zone 4 Temp. | 196 | °C | |
| Adapter Temperature | 199 | °C | |
| Melt Temperature | 196 | °C | |
| Die Temperature | 194 - 196 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HMN TR-935 | Chevron Phillips Chemical Company LLC | MDPE | Marlex® |
| Nipol® AR 51 | Zeon Corporation | Rubber | Nipol® AR |
| Nylene® 4004 HS | Custom Resins Group | Nylon 6 | Nylene® |
| Leona™ 13G25 | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| SABIC® PPcompound 8503 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
