Order Products : sales@su-jiao.com
ICORENE® 1741
| Category: | mHDPE , Metallocene High Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3i9Ncu_ICORENE-1741.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 1741 is a metallocene high density polyethylene specifically developed for use in rotational moulding. ICORENE® 1741 is designed for use in many different rotomoulding applications. It has good overall mouldability, high rigidity and very good toughness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal) | 30.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 800 | % | ASTM D638 |
| Flexural Modulus | 800 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 210 | J/cm | ASTM D4226 |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP.70.960 | United Polychem | HDPE | Unilex™ |
| ADEKA G series | Adeka Corporation | PUR-Ether | ADEKA |
| Badalac® ABS 10 TM-Z2 | Bada AG | ABS | Badalac® |
| ExTima™ GP MB PA12 720 | Ovation Polymers Inc. | Nylon 12 | ExTima™ |
| Laticonther 52/11 CP3/600 F3 | LATI S.p.A. | PP Homopolymer | Laticonther |
