Order Products : sales@su-jiao.com
PrimaFlex® PC/PBT 3015
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | Plastic Solutions, Inc. |
| Trademark: | PrimaFlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3h4rBq_PrimaFlex-PC-PBT-3015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Description: PC/PBT 3015 is an injection grade polycarbonate/PBT. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 46.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 130 | % | ASTM D638 |
| Flexural Modulus | 2000 | MPa | ASTM D790 |
| Flexural Strength | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 800 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 86.7 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 102 | RTP Company | PP, Unspecified | RTP |
| SCHULAMID® 66 GF 50 H | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| Iupilon® TMB1412 | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
| Lucky Enpla LAY1003 | Lucky Enpla Co LTD | PC+ABS | Lucky Enpla |
| Daelim Po1y® EP2001EN | DAELIM INDUSTRIAL CO., LTD. | mLLDPE | Daelim Po1y® |
