Order Products : sales@su-jiao.com
CP PRYME® Polyethylene PE100LD-20M
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Chase Plastics Services Inc. |
| Trademark: | CP PRYME® Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3g3QmV_CP-PRYME-Polyethylene-PE100LD-20M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP PRYME® Polyethylene PE100LD-20M is a Low Density Polyethylene product. It can be processed by injection molding and is available in North America. Typical application: Food Contact Applications. Primary characteristic: food contact acceptable. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.917 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 172 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVACARB NC-8810M | NOVA Polymers, Inc. | PC+ABS | NOVACARB |
| Nypol® PA B3 G15 NTLA010 NT317 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| Ateva® 2030 | Celanese EVA Performance Polymers | EVA | Ateva® |
| Elastron® D D100.A65.N | Elastron USA, Inc. | SBS | Elastron® D |
| KOPA® KN133G30HS | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
