Order Products : sales@su-jiao.com
SOFTAPLAS S 56A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | SOFTAPLAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3aov6D_SOFTAPLAS-S-56A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic Elastomer - Excellent hydrolytic Stability and balance of properties. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.990 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/3.8 kg) | 5.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation 1(Break) | 650 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, A Scale (15 sec): 56 - 57Tensile Elongation at Break, ASTM D638, 50 mm/min: >650% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® A9870 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TEDUR® L 9401-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| UNISOFT TPE™ ST-88A-NT-2-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| KOCETAL® WH702 | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Moplen EP300C | PolyMirae | PP Impact Copolymer | Moplen |
