Order Products : sales@su-jiao.com
THERMOLAST® K TC7HFZ (Series: UV/HF/SF)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | THERMOLAST® K |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3agUli_THERMOLASTKTC7HFZSeriesUVHFSF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The UV/HF/SF Series is your material solution for applications requiring high UV resistance, perfect surface finish and high flow ability. It is particularly appropriate for automotive exterior components. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.02 | g/cm³ | ISO 1183 |
| Spiral Flow | 100 | cm |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Break) | 5.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 550 | % | ISO 37 |
| Tear Strength 3 | 19 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60 - 80 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 200 | °C | |
| Front Temperature | 220 | °C | |
| Mold Temperature | 25 - 40 | °C | |
| Injection Pressure | 20.0 - 100 | MPa | |
| Back Pressure | 2.00 - 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method B, right-angle specimen (cut) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXT REGRIND PA66 101L-300RG | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT REGRIND |
| Durethan® AM 40 X H2.0 DUS041 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| Hapflex™ 650 FR | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Hapflex™ 580-3 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| ALTECH® PA6 + ASA A 4010/621 MR10 IM UV | ALBIS PLASTIC GmbH | ASA+Nylon | ALTECH® PA6 + ASA |
