Order Products : sales@su-jiao.com
ISOTHANE® 3095AU-RS
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Great Eastern Resins Industrial Co., Ltd. (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3ZsnIF_ISOTHANE3095AURS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISOTHANE 3095AU-RS resin is a copolymer based thermoplastic polyurethane. It has excellent mechanical properties, UV resistance, hydrolysis resistance and short injection cycle time. The product can be processed by extrusion and injection molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 15.0 | MPa | ASTM D412 |
| 100% strain | 17.0 | MPa | ASTM D412 |
| 300% strain | 24.0 | MPa | ASTM D412 |
| Tensile Strength | 40.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 570 | % | ASTM D412 |
| Tear Strength 1 | 165 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 90 | °C | |
| Drying Time - Desiccant Dryer | 3.0 - 5.0 | hr | |
| Dew Point - Desiccant Dryer | -40 - -30 | °C | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 200 - 210 | °C | |
| Middle Temperature | 205 - 215 | °C | |
| Front Temperature | 205 - 215 | °C | |
| Nozzle Temperature | 200 - 210 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 195 - 205 | °C | |
| Cylinder Zone 3 Temp. | 205 - 215 | °C | |
| Cylinder Zone 5 Temp. | 205 - 215 | °C | |
| Die Temperature | 200 - 210 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yanshan PE 112A-1 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| ARCEL® ULV (2.50 pcf) | NOVA Chemicals | PS+PE | ARCEL® |
| FERROFLO® SPS05PK02NA | Ferro Corporation | PS (HIPS) | FERROFLO® |
| Grilon® TSG-50 FA | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| Innothane® FM-110 | Innovative Polymers, Inc. | TSU | Innothane® |
