Order Products : sales@su-jiao.com
Shinko-Lac® ASA S359
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Zb8IZ_Shinko-Lac-ASA-S359.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Shinko-Lac® ASA S359 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for injection molding. Important attributes of Shinko-Lac® ASA S359 are:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/5.0 kg) | 0.20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 42.2 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1810 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 60.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 93.0 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 79.0 | °C | |
| Vicat Softening Temperature | 96.0 | °C | ISO 306/B |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SIBUR PE 15803-020 | SIBUR, LLC | LDPE | SIBUR PE |
| Tenite™ Propionate 383A2R30012 Natural, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| XANTAR® C RC 3012 | Mitsubishi Engineering-Plastics Corp | PC+ABS | XANTAR® C |
| Delta PER-3G20 | Delta Polymers | PE, Unspecified | Delta |
| Optix® CP-41 | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
