Order Products : sales@su-jiao.com

SABIC® LLDPE M500026

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Saudi Basic Industries Corporation (SABIC)
Trademark:	SABIC® LLDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3VYHts_SABIC-LLDPE-M500026.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

SABIC® LLDPE M500026 is a high flow, linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR), mouldability and gloss.

Typical applications.

Injection Molding: SABIC® LLDPE M500026 is typically used for injection moulding of containers, reclosure lids and fast cycle, deep draw injection moulding applications, which takes advantage of its high flow properties. Also, the higher melting point of the material allows for high end-use temperature when compared with conventional polyethylenes of equal density.

Masterbatch Compounding: SABIC® LLDPE M500026 resin is typically used for injection moulding masterbatch where a high filler acceptance is required combined with a good flow.

This product is not intended for and must not be used in any pharmaceutical/medical applications.

General Information
Features	Copolymer Fast Molding Cycle Good Moldability High ESCR (Stress Crack Resist.) High Flow High Gloss Low Density Low Temperature Toughness Narrow Molecular Weight Distribution
Uses	Compounding Containers Lids Masterbatch
Processing Method	Compounding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.926	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	50	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal CO-630, Compression Molded, F50)	2.00	hr	ASTM D1693A

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	55		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant (Compression Molded)	354	MPa	ASTM D638
Tensile Strength			ASTM D638
Yield, Compression Molded	13.0	MPa
Break, Compression Molded	12.4	MPa
Tensile Elongation (Break, Compression Molded)	120	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, Compression Molded)	450	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746
Vicat Softening Temperature	88.0	°C	ASTM D1525 ¹

Injection	Nominal Value	Unit
Processing (Melt) Temp	180 to 230	°C
Mold Temperature	5.00 to 30.0	°C

Note Message
1 .	Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Telcar® TL-1268A	Teknor Apex Company	TPE	Telcar®
Tipwood® 50 EX	Tipco Industries Ltd.	PP Copolymer	Tipwood®
NatureFlex™ 140NP	Innovia Films Ltd.	Cellulose, Regenerated	NatureFlex™
ACRYLITE® H15	Evonik Cyro LLC	Acrylic (PMMA)	ACRYLITE®
AKROMID® B3 GF 15 black (4002)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®