Order Products : sales@su-jiao.com
TECAPEEK® PVX
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECAPEEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3U5Clg_TECAPEEK-PVX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECAPEEK® PVX is an ultra high performance bearing material that incorporates the properties of a premium polymetric matrix material with optimum levels of specific wear enhancing additives. This formulation raises the continuous use temperature by approximately 40°F and increases the limiting PV while maintaining excellent chemical resistance. When used as a non-metallic bearing, TECAPEEK® PVX offers a superb range of tribiological performance. It is designed to run at high loads and speeds, in hostile environments, either dry or lubricated. TECAPEEK™ PVX'S exceptional properties make it an ideal material for bearing surfaces in the most demanding applications and in the harshest conditions. Industrial, automotive, marine, nuclear, petroleum and aerospace industry applications realize great benefits from its use. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 119 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.5 | % | ASTM D638 |
| Flexural Modulus - Tangent (23°C) | 9650 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 207 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 152 | MPa | ASTM D695 |
| Coefficient of Friction 1 | 0.19 - 0.21 | ASTM D1894 | |
| Wear Rate | 0.00125 - 0.00150 | in/min |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Limiting Pressure Velocity | 25000 - 30000 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.35 mm) | 277 | °C | ASTM D648 |
| Continuous Use Temperature | 260 | °C | |
| Melting Temperature | 334 | °C | |
| CLTE - Flow | 5.6E-6 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+5 - 1.0E+8 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.4E+5 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Data based on injection molded samples. |
| Note Message | |
|---|---|
| 1 . | @ 68°F, 1200 in/min, 155 lbs Load |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 GR10 NL100 | Eurotec Engineering Plastics | PBT | Tecodur® |
| TYLON® 835L | Tyne Plastics LLC. | Nylon 66 | TYLON® |
| APEX® 2060-H | Teknor Apex Company | PVC, Flexible | APEX® |
| Karina COMP. PVC CRYSTAL -E 55/260 | Karina Ind. e Com. de Plásticos Ltda | PVC, Flexible | Karina |
| OPTODYNE™ UV-1100 | DAIKIN AMERICA, INC. | Epoxy | OPTODYNE™ |
