Order Products : sales@su-jiao.com
Generic Nylon 46 - Carbon Fiber
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3U1ZK4_Generic-Nylon-46---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 46 - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.22 - 1.42 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | 0.29 - 0.36 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.98 - 1.0 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 11000 - 24200 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 158 - 243 | MPa | ISO 527-2 |
| Tensile Strain (Yield, 23°C) | 1.2 - 2.5 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 9000 - 20000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 230 - 328 | MPa | ISO 178 |
| Coefficient of Friction | 0.12 - 0.26 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 - 8.1 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 49 - 55 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 290 | °C | ISO 75-2/A |
| CLTE - Flow | 8.0E-6 - 3.4E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 - 2.5E+7 | ohms | IEC 60093 |
| Insulation Resistance (23°C) | 1.0E+2 - 2.5E+7 | ohms | IEC 60167 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 80.1 | °C | |
| Drying Time | 5.0 - 7.0 | hr | |
| Rear Temperature | 299 - 300 | °C | |
| Middle Temperature | 299 - 310 | °C | |
| Front Temperature | 299 - 310 | °C | |
| Nozzle Temperature | 305 | °C | |
| Processing (Melt) Temp | 281 - 310 | °C | |
| Mold Temperature | 107 - 130 | °C | |
| Back Pressure | 0.172 - 6.00 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon 46 - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLPLAST TH 7000D | UTEKSOL d.o.o. | SBS | SOLPLAST TH |
| Taipol 4202 | TSRC Corporation | SBS | Taipol |
| TOTAL Polyethylene MDPE 3802 YCF | TOTAL Refining & Chemicals | MDPE | TOTAL Polyethylene |
| Estane® ZHF 90AT2 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| LARIPUR® LPR 9060EF | COIM S.p.A. | TPU-Polyether | LARIPUR® |
