Order Products : sales@su-jiao.com
Xuchuan 2155/B-8290
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3RW1iQ_Xuchuan-2155-B-8290.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Xuchuan 2155/B-8290 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Primary characteristic: good aesthetics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.500 to 0.600 | g/cm³ | |
| Density | |||
| A-2155 : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-8290 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-2155 : 40°C | 0.800 to 1.20 | Pa·s | |
| B-8290 : 40°C | 0.800 to 1.20 | Pa·s |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Ross Flex (23°C) 1 | No Crack |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 40.0 to 50.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 250 to 300 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 8.0 to 10.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 55 to 65 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 4.00 to 6.00 | MPa | |
| Tensile Elongation (Break) | 390 to 550 | % | |
| Tear Strength | 18.0 to 26.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 82 to 84 | ||
| Demold Time | 4.0 to 5.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Note Message | |
|---|---|
| 1 . | 40000 cycles |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1500.5-72D | RTP Company | TPE | RTP |
| Starex NT-7200 W | SAMSUNG SDI CO., LTD. | ABS+PET | Starex |
| Beetle® PBTS830F | Teknor Apex Company (Chem Polymer) | PBT | Beetle® |
| EnCom F2 PC 1212 | EnCom, Inc. | PC | EnCom |
| CERTENE™ 1320 | Muehlstein | PS (HIPS) | CERTENE™ |
