Order Products : sales@su-jiao.com
Ingeo™ 7032D
| Category: | PLA , Polylactic Acid |
| Manufacturer: | NatureWorks® LLC |
| Trademark: | Ingeo™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3RHSqF_Ingeo-7032D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ingeo biopolymer 7032D is a bottle grade resin designed for injection stretch blow molded applications where heat setting is needed. Ingeo biopolymer 7032D can be run on conventional and heat set ISBM equipment typically used for PET. Ingeo biopolymer 7032D is run at lower processing temperatures than PET. Injection stretch blow molded bottles (ISBM) for singe- and two-stage operations. Ideal for applications where heat setting is required, such as:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (210°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.50 | % | ASTM D955 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Carbon Dioxide Transmission Rate | 2850 | cm³/m²/24 hr | Internal Method |
| Oxygen Permeability | 675 | cm³/m²/24 hr | ASTM D1434 |
| Water Vapor Transmission Rate | 380 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 12.8 to 15.6 | °C | ASTM D3417 |
| Peak Crystallization Temperature (DSC) | 155 to 170 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 to 85.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.010 | % | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 210 | °C | |
| Nozzle Temperature | 210 to 220 | °C | |
| Processing (Melt) Temp | 200 to 220 | °C | |
| Mold Temperature | 21.0 to 38.0 | °C | |
| Back Pressure | 0.689 to 1.38 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3590 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Sumiflex® K K768AC9 | Mitsubishi Chemical Corporation | PVC Elastomer | Sumiflex® K |
| Vikalloy IM90 | Viking Polymers, LLC | PMMA+PVC | Vikalloy |
| BESTPOM C09T/01 | Triesa Plastics | Acetal (POM) Copolymer | BESTPOM |
| Laprene® 8K1000A55 | SO.F.TER. SPA | SEBS | Laprene® |
