Order Products : sales@su-jiao.com

NuSil MED-420

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3Pzf1M_NuSil-MED-420.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chemistry of the fluid should not match the chemistry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance. Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects. Comments: METHYL FLUORO COPOLYMER (LOW FLUORO)

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chemistry of the fluid should not match the chemistry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance.

Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects.

Comments: METHYL FLUORO COPOLYMER (LOW FLUORO)

General Information
Features	Copolymer Hydrophobic
Uses	Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Dip Coating Spraying

Uncured Properties	Nominal Value	Unit
Density	1.05	g/cm³
Viscosity	0.10 to 100	Pa·s

Resin Grade	Manufacturer	Category	Trademark
Maxelast® C4740	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
PROTEQ™ H20SQ8	Marplex Australia Pty. Ltd.	PP Homopolymer	PROTEQ™
SLOVAMID® 66 GF 35 HTS	Plastcom	Nylon 66	SLOVAMID® 66
Daelim Po1y® PP-137T	DAELIM INDUSTRIAL CO., LTD.	PP, Unspecified	Daelim Po1y®
KOPLA PP KPG1090	KOPLA Co., Ltd.	PP, Unspecified	KOPLA PP