Order Products : sales@su-jiao.com
Drystar™ 0113
| Category: | Copolyester , Copolyester |
| Manufacturer: | Eastman Chemical Company |
| Trademark: | Drystar™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3NCQtC_Drystar-0113.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Eastman is pleased to announce the launch of DRYSTAR* copolyesters. This new product-line is designed to meet the needs of converters seeking value-added solutions to their drying requirements of copolyesters. Eastman?s copolyesters are highly valued for their excellent balance of properties such as superior aesthetics, impact strength, and chemical resistance. These properties can be optimally realized when the resins are properly dehydrated in accordance to recommended drying conditions and equipment. Recognizing this value, Eastman conceived Drystar™ copolyesters to allow converters with limited access to desiccant dryers to achieve these optimizations. In addition, some converters with desiccant dryers may still find Drystar™ copolyesters value-adding to attain production flexibility and cost saving by removing the drying process prior to injection molding, profile extruding, or extrusion blow molding copolyesters. The initial launch comprises of the commercialization of four grades of Drystar™ copolyesters and Eastman has on-going program to extend this strategic product-line in the future. *DRYSTAR is only available in the Asia Pacific Region. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.27 | g/cm³ | ASTM D792 |
| 23°C | 1.27 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 to 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.13 | % | ASTM D570, ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 106 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 50.0 | MPa | ASTM D638 |
| Yield, 23°C, 4.00 mm | 50.0 | MPa | ISO 527-2 |
| Break, 23°C | 28.0 | MPa | ASTM D638 |
| Break, 23°C, 4.00 mm | 28.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield, 23°C | 4.3 | % | ASTM D638 |
| Yield, 23°C, 4.00 mm | 4.2 | % | ISO 527-2 |
| Break, 23°C | 110 | % | ASTM D638 |
| Break, 23°C, 4.00 mm | 60 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 2100 | MPa | ASTM D790 |
| 23°C, 4.00 mm | 2000 | MPa | ISO 178 |
| Flexural Stress | |||
| 23°C, 4.00 mm | 68.0 | MPa | ISO 178 |
| Yield, 23°C | 70.0 | MPa | ASTM D790 |
| Tear Resistance 1 | |||
| 10 % solids & 6/9 AF New test solution : 23°C | 1.0 to 2.0 | % | |
| 10% solids & 6/9 AF test oil : 23°C | 1.0 to 2.0 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -40°C | 37 | J/m | ASTM D256 |
| 23°C | 100 | J/m | ASTM D256 |
| -40°C 2 | 4.2 | kJ/m² | ISO 180 |
| 23°C 3 | 6.2 | kJ/m² | ISO 180 |
| Unnotched Izod Impact | ASTM D4812 | ||
| -40°C | No Break | ||
| 23°C | No Break | ||
| Multi-Axial Instrumented Impact Energy | ISO 6603-2 | ||
| -40°C, Energy to Peak Force | 13.0 | J | |
| 23°C, Energy to Peak Force | 12.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 70.0 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, Unannealed | 64.0 | °C | ASTM D648, ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 85.0 | °C | ASTM D1525, ISO 306/A 4 4 |
| -- | 76.0 | °C | ISO 306/B |
| Specific Heat | |||
| 60°C | 1300 | J/kg/°C | |
| 240°C | 2000 | J/kg/°C | |
| Thermal Conductivity (23°C) | 0.19 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 5(23°C) | 16 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 kHz | 2.60 | ||
| 23°C, 1 MHz | 2.40 | ||
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 kHz | 5.0E-3 | ||
| 23°C, 1 MHz | 0.017 | ||
| Arc Resistance | 158 | sec | ASTM D495 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 6.0 | hr | |
| Processing (Melt) Temp | 250 to 270 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 90° |
| 2 . | 2 mm |
| 3 . | 2 mm |
| 4 . | Loading 1 (10 N) |
| 5 . | 500 V/sec, Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Thermoplastic Polyolefin FT5250-650UVA | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| TECHNYL® A 218 MZ15 V25 BLACK 31 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| 4TECH® 9KL32130 | 4Plas | PBT+PET | 4TECH® |
| AKROMID® B3 GK 30 black (1827) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Lupolen 5021 DX | LyondellBasell Industries | HDPE | Lupolen |
