Order Products : sales@su-jiao.com
MARPOL® HDP 510
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3MaNzU_MARPOL-HDP-510.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Recommended Applications Extrusion of potable water, natural gas, industrial, and mining pipe. MARPOL ® HDP 510 is recognized by the Plastic Pipe Institute as having a pipe material designation code of PE 4710 and PE 100. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ASTM D4883 | ||
| -- 1 | 0.949 | g/cm³ | |
| -- 2 | 0.959 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | > 5000 | hr | ASTM D1693C |
| Carbon Black Content | 2.3 | % | ASTM D1603 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 3 | ASTM D638 | ||
| Yield | 25.0 | MPa | |
| Break | 37.9 | MPa | |
| Tensile Elongation 4(Break) | 600 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1030 | MPa | ASTM D790 |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.89 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability | 220 | °C | ASTM D2513 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Natural |
| 2 . | Black |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoFin GF 20 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
| TEKNIFLEX® PP300 | Tekni-Films, a div of Tekni-Plex | Film, PP | TEKNIFLEX® |
| VAMPLEN 0024 V0 A | Vamp Tech | PP Homopolymer | VAMPLEN |
| DOWLEX™ 2344 | The Dow Chemical Company | PE Copolymer | DOWLEX™ |
| Gallonprene® GP520-9016 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
