Order Products : sales@su-jiao.com

NuSil CV2-2946

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3LdNSZ_NuSil-CV2-2946.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.6 W/m-K, Thin Bond Line

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.6 W/m-K, Thin Bond Line

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	0.60	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 20
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	140	g/min

Uncured Properties	Nominal Value	Unit
Color	White
Curing Time (150°C)	0.50	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	55
Tensile Strength	2.76	MPa
Tensile Elongation at Break	230	%
Tear Strength	9.63	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP EMI 2863-75A	RTP Company	TPO (POE)	RTP
DINALON® A1S25 G35 H	Grupo Repol	Nylon 66	DINALON®
LG PMMA EG920	LG MMA Corp.	Acrylic (PMMA)	LG PMMA
SQUARE® SCR2530-30A/B	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®
Durethan® DP 2131/20 W1 901317	LANXESS GmbH	Nylon 6	Durethan®