Order Products : sales@su-jiao.com
Andur 7501 DPLF/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3KAxC2_Andur-7501-DPLF-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7501 DPLF is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer containing .1% or less free TDI. An elastomer with a hardness of 74 to 77 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 76 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 37.9 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 180 | % | ASTM D412 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.0 - 3.0 | min | |
| Demold Time (100°C) | 10 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 74 to 77Die C Tear, ASTM D1004: 725 pliAverage Split Tear, ASTM D1938: 210 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 7501 DPLF: 150-170°F Curene 442: 230°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 MS 5 | RTP Company | Nylon 66 | RTP |
| Prime Clear-X 200 | Primex Plastics Corporation | PS (HIPS) | Prime Clear-X |
| ALTECH® PBT + ASA A 4212/500 GF MR | ALBIS PLASTIC GmbH | PBT+ASA | ALTECH® PBT + ASA |
| HiFill® PA6 GF5 L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| KOCETAL® UR304LOBK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
