Order Products : sales@su-jiao.com
SCANAMID 66 A12^ F30
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Polykemi AB |
| Trademark: | SCANAMID 66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3GCIQU_SCANAMID-66-A12-F30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass fibre reinforced |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.36 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.1 | -- | % | |
| Flow | 0.30 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Stress | 175 | 135 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 3.0 | 5.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 9000 | 6100 | MPa | ISO 178 |
| Flexural Stress | 245 | 160 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | |||
| -20°C | -- | 10 | kJ/m² | |
| 23°C | 10 | 13 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | |||
| -20°C | -- | 38 | kJ/m² | |
| 23°C | 47 kJ/m² | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 1 | ||||
| 0.45 MPa, Unannealed | 250 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 250 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | > 230 | -- | °C | ISO 306/B50 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating (1.60 mm) | HB | -- | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 650 | -- | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | 120°C/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO 24 TL CC | Arkema | Nylon 11 | Rilsan® |
| Sanren Y1200 (Premium-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| TAIRILAC AG22AT | Formosa Plastics Corporation | ABS | TAIRILAC |
| VENYL SFRHWGT300H - 8229 | AD majoris | Nylon 6 | VENYL |
| ISPLEN® PP 030 G1E | REPSOL | PP Homopolymer | ISPLEN® |
