Order Products : sales@su-jiao.com
DOWLEX™ 2049P
| Category: | LLDPE , Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOWLEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3GAZPZ_DOWLEX-2049P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Complies with
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.926 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Film Puncture Resistance (38 µm) | 3.06 | J/cm³ | Internal method |
| Film strength | ASTM D882 | ||
| MD : 38 µm | 128 | J/cm³ | ASTM D882 |
| TD : 38 µm | 140 | J/cm³ | ASTM D882 |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 38 µm | 235 | MPa | ASTM D882 |
| 2% secant, TD : 38 µm | 281 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 38 µm | 13.2 | MPa | ASTM D882 |
| TD : Yield, 38 µm | 14.8 | MPa | ASTM D882 |
| MD : Fracture, 38 µm | 47.8 | MPa | ASTM D882 |
| TD : Fracture, 38 µm | 42.3 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture, 38 µm | 630 | % | ASTM D882 |
| TD : Fracture, 38 µm | 740 | % | ASTM D882 |
| Dart Drop Impact (25 µm) | 220 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 38 µm | 250 | g | ASTM D1922 |
| TD : 38 µm | 590 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 112 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 121 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 38.1 µm) | 80 | ASTM D2457 | |
| Haze (38.1 µm) | 9.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 207 - 216 | °C |
| Extrusion instructions |
|---|
| 吹塑薄膜的制造条件： 螺杆尺寸：2.5 英寸 (63.5 mm)；24:1 L/D 螺杆类型：带 Maddock Mixer 的 MC-4 模具间隙：40 密尔 (1.0 mm) 熔体温度：405-420°F (207-216°C) 输出：模具周长的 7 磅/小时/英寸 模具直径：6 英寸 放大比：2.5:1 螺杆速度：50 rpm 冷冻线高度：16 英寸 (406 mm) 脱离速度：74 fpm（22 米/分） |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8984-78 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Moplen EP340K | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| AKROMID® B3 GF 15 1 natural (2461) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Durez® 31735 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| DURANEX® 711SA | Polyplastics Co., Ltd. | ABS+PBT | DURANEX® |
