Order Products : sales@su-jiao.com

ALKAMIX™ MB-6009

Category:	Unspecified , Unspecified
Manufacturer:	Marplex Australia Pty. Ltd.
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3Ey2lu_ALKAMIX-MB-6009.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX™ MB-6009 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 15 percent. ALKAMIX™ MB-6009 can be added to polyethylene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent. The maximum level of addition of ALKAMIX™MB-6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

Message

ALKAMIX™ MB-6009 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 15 percent.

ALKAMIX™ MB-6009 can be added to polyethylene during extrusion to reduce the blocking tendency of film, particularly where minimum blocking tendency is required. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent.

The maximum level of addition of ALKAMIX™MB-6009 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 6.5 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

General Information
Additive	Antiblock (15%)
Uses	Masterbatch

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505

Injection	Nominal Value	Unit
Processing (Melt) Temp	< 200	°C

Resin Grade	Manufacturer	Category	Trademark
Supol HR570E	LyondellBasell Industries	TPO	Supol
Tarnamid® T- 27 CF30	Grupa Azoty S.A.	Nylon 6	Tarnamid®
GAPEX® RPP25EB68HB GRAY	Ferro Corporation	PP Homopolymer	GAPEX®
LEXAN™ 203R resin	SABIC Innovative Plastics	PC	LEXAN™
Sylvin 8857-60D Green 3176	Sylvin Technologies Incorporated	PVC, Rigid	Sylvin