Order Products : sales@su-jiao.com

Pharmalene® MP 20 PH

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Versalis S.p.A.
Trademark:	Pharmalene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3Eub8w_Pharmalene-MP-20-PH.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Pharmalene MP 20 PH is a homopolymer low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP).

The main use is in the pharmaceutical sector. Pharmalene MP 20 PH is suitable for injection moulding, medium thickness articles, and masterbatch applications. Thanks to its excellent organoleptic properties, the product can be used for coating and flexible packaging.

General Information
Features	Excellent Organoleptic Properties Low density Homopolymer High pressure heating resistance Compliance of Food Exposure
Uses	Packaging Non-specific food applications Bottle Coating application Drug Medical/nursing supplies
Agency Ratings	EP Unspecified Rating FDA Food Exposure, Not Rated USP 34 Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.921	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Injection Molded)	46		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield, injection molding	9.00	MPa	ISO 527-2
Fracture, injection molding	11.0	MPa	ISO 527-2
Tensile Strain (Break, Injection Molded)	500	%	ISO 527-2

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746
Vicat Softening Temperature	85.0	°C	ISO 306/A
Melting Temperature	108	°C	Internal method

Injection	Nominal Value	Unit
Rear Temperature	160 - 200	°C
Middle Temperature	160 - 200	°C
Front Temperature	160 - 200	°C

Injection instructions
Pharmalene MP 20 PH is easily processed in extrusion coating lines.The suggested temperature is 260÷330°C.Pharmalene MP 20 PH can be extruded at thickness lower than 10 µm.

Resin Grade	Manufacturer	Category	Trademark
WPP PP PRC25TF4-Black B46211	Washington Penn Plastic Co. Inc.	PP Homopolymer	WPP PP
Ultrathene® UE672102	LyondellBasell Industries	EVA	Ultrathene®
ALFATER XL® D40I 4FC0000	ALBIS PLASTIC GmbH	TPV	ALFATER XL®
ASI POLYPROPYLENE 3486-01	A. Schulman Inc.	PP Homopolymer	ASI POLYPROPYLENE
Vipel® F010-H2O-00	AOC, L.L.C.	Vinyl Ester	Vipel®