Order Products : sales@su-jiao.com
STYRON™ H9152T
| Category: | PS (HIPS) , High Impact Polystyrene Resin |
| Manufacturer: | Trinseo |
| Trademark: | STYRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3D59z2_STYRON-H9152T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STYRON™ H9152T is a high-impact polystyrene with excellent balance of flow, toughness, stiffness and heat resistance. It is designed for injection molding applications. Main Characteristics:
Applications:
Complies with
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 33.1 | MPa | |
| Break, Compression Molded | 20.7 | MPa | |
| Break, Injection Molded | 30.3 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Break, Compression Molded | 35 | % | |
| Break, Injection Molded | 40 | % | |
| Flexural Modulus | ASTM D790 | ||
| Compression Molded | 2460 | MPa | |
| Injection Molded | 2560 | MPa | |
| Flexural Strength | ASTM D790 | ||
| Compression Molded | 49.6 | MPa | |
| Injection Molded | 58.6 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 23°C, Compression Molded | 75 | J/m | |
| 23°C, Injection Molded | 91 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 77.2 | °C | |
| 1.8 MPa, Annealed | 98.9 | °C | |
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.50 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Abstron IMGS 20 | Bhansali Engineering Polymers Limited | SAN | Abstron |
| NYCOA Polyamide 5300 HS | Nycoa (Nylon Corporation of America) | Nylon 66 | NYCOA Polyamide |
| DENYL HT 6010 Y | Vamp Tech | PPA+Nylon | DENYL |
| Hanwha Total PE C430A | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| Deprene 201-64 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PP+EPDM | Deprene |
