Order Products : sales@su-jiao.com
EMOPLEN® A 1102 T4
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Co5VU_EMOPLEN-A-1102-T4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene %40 talcum filled |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.24 to 1.30 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 to 13 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.80 to 0.90 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 70 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3000 to 5000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 30.0 to 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 3.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 110 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 105 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) FABS 30 GB | A. Schulman Europe | ABS | POLYMAN® |
| NEXT SIGNATURE PA6 GM40-300 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| Geon™ Vinyl Flexible B65U0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| KOPLA PA66 KDG1133CR | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Karina MBPEB ANTISPLIT - 1000/0080 IE | Karina Ind. e Com. de Plásticos Ltda | LDPE | Karina |
