| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3CPv3s_Generic-PUR-Est-eth-TDI.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PUR-Est/eth,TDI This information is provided for comparative purposes only. |
| General Information |
|---|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (23°C) | 70 to 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 23°C) | 1.54 to 33.1 | MPa | ASTM D412 |
| Compression Set | 23 to 42 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | 370 to 6400 | cP | ASTM D2393 |
| Demold Time | 15 to 180 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4000 AR 10 | RTP Company | PPA | RTP |
| VESTAKEEP® 2000P | Evonik Industries AG | PEEK | VESTAKEEP® |
| Tuftec™ P1083 | AKelastomers | SEBS | Tuftec™ |
| ADDINYL A2 E | ADDIPLAST | Nylon 66 | ADDINYL |
| ExxonMobil™ AP3N | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |