Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding M3400
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 398Ocw_Geon-Vinyl-Rigid-Molding-M3400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Geon™ Vinyl Rigid Molding M3400 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2790 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 42.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 26 | % | ASTM D638 |
| Flexural Modulus | 2620 | MPa | ASTM D790 |
| Flexural Strength | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18 mm, Injection Molded | 150 | J/m | |
| 0°C, 3.18 mm, Injection Molded | 590 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 1000 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 70.0 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 60.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (ALL) | V-0 5VA | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ARNYL PA6 NERO | Daloga srl | Nylon 6 | ARNYL |
| Cheng Yu ML3435 | Cheng Yu Plastic Company Limited | PC | Cheng Yu |
| EXCELLOY SXF321 | Techno Polymer Co, Ltd. | ABS | EXCELLOY |
| Kingfa JH710 G10D | Kingfa | PC Alloy | Kingfa |
| POLYCOMPO PP V7000 | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
