Order Products : sales@su-jiao.com

API II 645

Category:	PS (HIPS) , High Impact Polystyrene
Manufacturer:	API II, Inc.
Trademark:	API II
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	37u7CR_APIII645.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Product Description:

API II 645 is high impact polystyrene used in applications requiring a superior level of toughness along with good tensile and flexural properties. Products can be produced using injection molding or extrusion process.

Application:

Molded into a wide variety of injected molded parts where high productivity is needed. Used in extruding sheet stock, housings, profiles and tubing.

General Information
Features	High Toughness Impact resistance, high Good flexibility
Uses	Pipe fittings Sheet Shell Profile
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.04	g/cm³	ASTM D892
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	3.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	40		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	26.2	MPa	ASTM D638
Tensile Elongation (Break)	47	%	ASTM D638
Flexural Modulus	2170	MPa	ASTM D790
Flexural Strength (Yield)	40.0	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (3.18 mm)	160	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	82.8	°C	ASTM D648
Vicat Softening Temperature	93.9	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
Radilon® A 42 100 NAT	Radici Plastics	Nylon 66	Radilon®
Resinoid 2089	Resinoid Engineering Corporation	Phenolic	Resinoid
SMASH!® Plastic	Smooth-On, Inc	PUR, Unspecified	SMASH!®
XANTAR® LDS 3730	Mitsubishi Engineering-Plastics Corp	PC	XANTAR® LDS
Greenflex® ML 31	Versalis S.p.A.	EVA	Greenflex®