Order Products : sales@su-jiao.com
MARPOL® HDM 510-UV
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 34r84D_MARPOL-HDM-510-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MARPOL® HDM 510-UV exhibits excellent stiffness for thin walled applications, improved stack strength and low viscosity for exceptional processing with shorter cycle times. This resin's superior physical properties provide impact resistance for demanding applications and low warpage for improved part quality and reliability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.964 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 33.0 | MPa | |
| Break | 15.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 | % | |
| Break | 100 | % | |
| Flexural Modulus - 1% Secant | 1700 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6 7500 GF20 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| ACCUCOMP™ ABS846HL | ACLO Compounders Inc. | ABS | ACCUCOMP™ |
| Axpoly® PP19 1034 | Axion Polymers | PP, Unspecified | Axpoly® |
| HAIPLEN H50 T2 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
| OLEFISTA™ QM4301D/QMC292 | Mitsubishi Chemical Performance Polymers, Inc. | Elastomer, Specialty | OLEFISTA™ |
