Order Products : sales@su-jiao.com
Nanguang TPU S-75AX
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Fujian Nanguang Light Industry Co., Ltd. |
| Trademark: | Nanguang TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 34FYW0_Nanguang-TPU-S-75AX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nanguang TPU S-75AX is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 to 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 to 77 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 30.0 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 3.43 | MPa | |
| 300% Strain | 17.7 | MPa | |
| Tensile Strength | 29.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Tear Strength (Split) | 54 | kN/m | ASTM D470 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Processing (Melt) Temp | 160 to 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FF 39 D | Versalis S.p.A. | LDPE | Riblene® |
| Pro-fax SD183 | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
| Teflon® PFA 950HP Plus | DuPont Fluoropolymers | PFA | Teflon® PFA |
| DiaAlloy TC-30M | Mitsubishi Rayon America Inc. | PC | DiaAlloy |
| LUVOCOM® 1/TF/18/SI/2 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
