Order Products : sales@su-jiao.com
Geon™ Vinyl Flexible XV3904
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Flexible |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 340uUi_Geon-Vinyl-Flexible-XV3904.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A transparent frosted PVC compound material, which is specially produced for extrusion and molding specified by FDA. The physical properties described below are typical values measured on compression molded sheets using accepted test methods. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 5.52 | MPa | ASTM D638 |
| Tensile Strength 2(Break) | 13.1 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield) | 390 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -40.0 | °C | ASTM D746 |
| Additional Information |
|---|
| 注释：本化合物配方中所用的全部成分均在美国食品及药物管理局《联邦法规法典》第21章中列出。唯一的限制是，增塑剂“仅用于高含水量食物”。本说明仅为食品及药物管理局清单关于该产品内容的概述。由用户负责确保此化合物适用于其预期应用。 |
| Note Message | |
|---|---|
| 1 . | Type 4, 5.1 mm/min |
| 2 . | Type 4, 5.1 mm/min |
| 3 . | Type 4, 5.1 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxguard™ CG-40 Series | Ashland Performance Materials | TS, Unspecified | Maxguard™ |
| Mirakutoran® TPU E598 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Telcar® TL-1522E | Teknor Apex Company | TPE | Telcar® |
| THERMOLAST® K TF1STL (Series: FC/S) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Wellamid® 22LH-NBK4 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
