Order Products : sales@su-jiao.com
Tarflen® SM-B40
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Grupa Azoty S.A. |
| Trademark: | Tarflen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 33naiI_Tarflen-SM-B40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Tarflen®SM-B40 is a polytetrafluoroethylene (PTFE) material, which contains 40% bronze filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. Tarflen®The main features of the SM-B40 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 3.20 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 2.0 - 3.5 | % | ISO 294-4 |
| Flow direction | 3.0 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 16.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 250 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : 23 to 100°C | 1.1E-4 | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 100°C | 8.5E-5 | cm/cm/°C | ISO 11359-2 |
| Extrusion instructions |
|---|
| Molding Pressure: 50 to 70 MpaMolding Temperature: 360 °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® J (142 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| ALCOM® PA66 910/32.1 TCE5 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Clearflex® H&T LGH 108 | Versalis S.p.A. | LLDPE | Clearflex® H&T |
| Evoprene™ HP 3710 | AlphaGary | SBC | Evoprene™ HP |
| Dynacom 501-G30 | Dynachem Co. Ltd. | ABS | Dynacom |
