Order Products : sales@su-jiao.com
SureSpec HD50-10
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 33gGg1_SureSpec-HD50-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD50-10 is a High Molecular Weight polyethylene copolymer certified prime grade developed for blow molding and thermoforming of high performance large size industrial parts. HD50-10 features good processability, good melt strength and rigidity, excellent combination of low temperature Impact strength and chemical resistance. HD50-10 recommended processing temperature is 190 to 210°C. HD50-10 complies with FDA regulation 21CFR 177.1520(c) 3.1a + 3.2a (conditions of use B through H) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | < 0.10 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | > 600 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 700 | % | ASTM D638 |
| Flexural Modulus | 1210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength 3(23°C) | 252 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 78.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Processing Temperature | 190 - 210 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C 7554 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| ARMAMID® PA 6-2EK | Poly Plastic | Nylon 6 | ARMAMID® |
| Ferro PP LPP20BN45HB BLACK | Ferro Corporation | PP Copolymer | Ferro PP |
| INEOS PP 100-CA50 | INEOS Olefins & Polymers Europe | PP Homopolymer | INEOS PP |
| Plaslube® PA4/6 TL15 HS | Techmer Engineered Solutions | Nylon 46 | Plaslube® |
